ANDREWS

Sold individually, unless noted

Sold individually, unless noted

Pushrods fit Shovel engines using stock diameter tubing so there is no cover tube interferenceFor stock stroke applicationsMade in the U.S.A.

Cams with .600 lift can easily be accommodated when used with high-lift springsMade from T-6 aluminum, collars are lightweight, hard-coated and ver...

Provide correct spring force for any of our performance cams when used in 74" and 80" motorsMax lift; installation does not require complicated mac...

Similar to stock 80-style parts, but lower profile for easier installation of higher lift camsRequired parts if you use 80-style valve guides that ...

Pushrods fit Shovel engines using stock diameter tubing so there is no cover tube interferenceFor stock stroke applicationsMade in the U.S.A.

Cam bolts into 66-84 (except 80-81) Big Twin engines with no head work; on 80-81 engines the height of the stock H-D valve guides restricts spring ...

Sold individually, unless noted.

Sold individually, unless noted.

Great street cam, especially for 84/88-inch strokers with maximum torque from 2,200 to 6,500 rpmUpgraded version of the original #6 grind

Cam bolts into 66-84 (except 80-81) Big Twin engines with no head work; on 80-81 engines the height of the stock H-D valve guides restricts spring ...

More mid-range and high-end power for street/strip with smooth idle; best cam for 74/80 (EU: 1,21 L/1,31L) inchers and small strokersSpring spacing...

Sold individually, unless noted

Sold individually, unless noted

Accommodates cam lifts of .550"+Installation does not require machining of headsKit includes four inner and four outer springsFor use with titanium...

Andrews completely adjustable pushrods easily replace the nonadjustable stock pushrods on Evolution enginesRocker boxes must be removed for install...

Andrews completely adjustable pushrods easily replace the nonadjustable stock pushrods on Evolution enginesRocker boxes must be removed for install...

EZ-install pushrods eliminate the need to disassemble your rocker boxes or remove the gas tank when changing cams or doing maintenanceMade in the U...

EZ-install pushrods eliminate the need to disassemble your rocker boxes or remove the gas tank when changing cams or doing maintenanceMade in the U...

Made in the U.S.A.These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatBolt-in cam for street or touring u...

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatBolt-in cam for heavier touring bikes and high-geared...

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatBolt-in street cam with fast open and close rampsUses...

These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatA 6000+ rpm cam for stock heads and springs with hydr...