Snowmobile Studs & Nuts
Filters
STUD BOY DEUCE BAR RUNNER
STUD BOYThe ‘’Deuce’’ Bar takes dual type wearbars to a new level. Utilizing the design benefit of the original ‘’Shaper’’ Bars’ concave side, this new dua...
View full detailsSTUD BOY SWITCH-BACK RUNNER
STUD BOYOur bars are made to the highest standard in the industry. Large round host bars with virgin carbide inserts brazed to stay in place and hold an ...
View full detailsSTUD BOY G-FORCE RUNNER
STUD BOYOur bars are made to the highest standard in the industry. Large round host bars with virgin carbide inserts brazed to stay in place and hold an ed...
View full detailsSTUD BOY SUPER-STOCK RUNNER
STUD BOYOur bars are made to the highest standard in the industry. Large round host bars with virgin carbide inserts brazed to stay in place and hold an ed...
View full detailsSTUD BOY SUPER-STOCK RUNNER
STUD BOYOur bars are made to the highest standard in the industry. Large round host bars with virgin carbide inserts brazed to stay in place and hold an ed...
View full detailsSTUD BOY SPT CARBIDE SNOW STUD
STUD BOYThe SPT carbide stud is designed for the rider who wants to ride safely with the extra confidence that only traction products provide. This stud is...
View full detailsWOODY'S 8" X 60 TURNING 1 1/2" END PAD (WYV-6580-1)
WOODY'SWoody’s most popular carbide4” turning carbide that has a sharp 60° edge angle for performance cornering; 1-1/2” carbide wear pads help extend runn...
View full detailsWOODY'S 6" X 60 TURNING 1 1/2" END PAD (TYV4-6500-1)
WOODY'SFeatures 6” of 60° carbide1/2” round bar with Flat-Top® designProvides safety and control for both studded and un-studded sledsSome skis may requir...
View full detailsWOODY'S 6" X 60 TURNING 1 1/2" END PAD (TAT4-9750-1)
WOODY'SFeatures 6” of 60° carbide1/2” round bar with Flat-Top® designProvides safety and control for both studded and un-studded sledsSome skis may requir...
View full detailsWOODY'S 8" X 60 TURNING 1 1/2" END PAD (WCA-5000-1)
WOODY'SWoody’s most popular carbide4” turning carbide that has a sharp 60° edge angle for performance cornering; 1-1/2” carbide wear pads help extend runn...
View full detailsWOODY'S ROUND SOCKET FOR COLORED WASHERS
WOODY'SAvailable in 5/16" sizeA unique tool used for driving locknuts down on push-through studsProvides the torque to tighten without touching the surfac...
View full detailsWOODY'S 6"X 60 TURNING 1 1/2" END PAD (TSD4-9350-1)
WOODY'SFeatures 6” of 60° carbide1/2” round bar with Flat-Top® designProvides safety and control for both studded and un-studded sledsSome skis may requir...
View full detailsWOODY'S STUD SHARPENING TOOL 60 DEGREES
WOODY'SEasy to useJust put the tool into a 3/8" drill chuck and sharpen studs while on the sled
WOODY'S SNO-CROSS CARBIDE RUNNER 10" C&A PRO SKI
WOODY'SCompetition-legal snocross wear bars; combined height of bar and carbide conforms to ISR rulesFeature 60° turning carbide and 5/8" bar thicknessSom...
View full detailsWOODY'S 6" X 60 TURNING 1 1/2" END PAD (TYV4-6580-1)
WOODY'SFeatures 6” of 60° carbide1/2” round bar with Flat-Top® designProvides safety and control for both studded and un-studded sledsSome skis may requir...
View full detailsWOODY'S 6" X 60 TURNING 1 1/2" END PAD (TAT4-9975-1)
WOODY'SFeatures 6” of 60° carbide1/2” round bar with Flat-Top® designProvides safety and control for both studded and un-studded sledsSome skis may requir...
View full detailsWOODY'S 8" X 60 TURNING 1 1/2" END PAD (WAT-9975-1)
WOODY'SWoody’s most popular carbide4” turning carbide that has a sharp 60° edge angle for performance cornering; 1-1/2” carbide wear pads help extend runn...
View full detailsWOODY'S 6"X 60 TURNING 1 1/2" END PAD (TSD4-8250-1)
WOODY'SFeatures 6” of 60° carbide1/2” round bar with Flat-Top® designProvides safety and control for both studded and un-studded sledsSome skis may requir...
View full detailsWOODY'S STUD SHARPENING TOOL 30 DEGREES
WOODY'SEasy to useJust put the tool into a 3/8" drill chuck and sharpen studs while on the sled
WOODY'S 6" X 60 TURNING 1 1/2" END PAD (TCA-5000-1)
WOODY'SFeatures 6” of 60° carbide1/2” round bar with Flat-Top® designProvides safety and control for both studded and un-studded sledsSome skis may requir...
View full detailsWOODY'S HARDWELD WEAR BAR (COMPOSITE ONLY) (HSY-6580-1)
WOODY'SA hardweld runner designed for extreme service or utility applicationsDouble bead of hardweld increases the depth of the runner for controllability...
View full detailsWOODY'S 4" X 60 TURNING 1 1/2" END PAD (DY4-6580-1)
WOODY'SThese 60° carbides reduce darting as they carve through existing grooves from single runners and spread the pressure across two points, extending t...
View full detailsWOODY'S HARDWELD WEAR BAR (COMPOSITE ONLY) (HSD-8250-1)
WOODY'SA hardweld runner designed for extreme service or utility applicationsDouble bead of hardweld increases the depth of the runner for controllability...
View full detailsWOODY'S HARDWELD WEAR BAR (COMPOSITE ONLY) (HSA-9750-1)
WOODY'SA hardweld runner designed for extreme service or utility applicationsDouble bead of hardweld increases the depth of the runner for controllability...
View full detailsWOODY'S 6" X 60 TURNING 1 1/2" END PAD (DY6-6580-1)
WOODY'SThese 60° carbides reduce darting as they carve through existing grooves from single runners and spread the pressure across two points, extending t...
View full detailsWOODY'S HARDWELD WEAR BAR (COMPOSITE ONLY) (HSA-9975-1)
WOODY'SA hardweld runner designed for extreme service or utility applicationsDouble bead of hardweld increases the depth of the runner for controllability...
View full detailsWOODY'S 4" X 60 TURNING 1 1/2" END PAD (DS4-8250-1)
WOODY'SThese 60° carbides reduce darting as they carve through existing grooves from single runners and spread the pressure across two points, extending t...
View full detailsWOODY'S 4" X 60 TURNING 1 1/2" END PAD (DA4-9975-1)
WOODY'SThese 60° carbides reduce darting as they carve through existing grooves from single runners and spread the pressure across two points, extending t...
View full detailsWOODY'S 6" X 60 TURNING 1 1/2" END PAD (DA6-9975-1)
WOODY'SThese 60° carbides reduce darting as they carve through existing grooves from single runners and spread the pressure across two points, extending t...
View full detailsWOODY'S ROUND DIGGER ALUM SUPPPRT PLATE GRB 48PC
WOODY'SFor most single and combination studding patterns
WOODY'S DOUBLE DIGGER ALUMSUPPORT PLATE (BLUE)
WOODY'SDual stud mounting with more rigidity and less weight than two aluminum plates or comparable steel platesFor use with 5/16" push-through studs
WOODY'S ROUND DIGGER ALUM SUPPORT PLATE ORN 48PC
WOODY'SFor most single and combination studding patterns
WOODY'S DOUBLE DIGGER ALUM SUPPORT PLATE (RED)
WOODY'SDual stud mounting with more rigidity and less weight than two aluminum plates or comparable steel platesFor use with 5/16" push-through studs
WOODY'S ANGLE DOUBLE DIGGER ALUM SUPPORT PL 12PC
WOODY'SAll the great features of standard Double Digger backing plates
WOODY'S DOUBLE DIGGER ALUMSUPPORT PLATE (GREEN)
WOODY'SDual stud mounting with more rigidity and less weight than two aluminum plates or comparable steel platesFor use with 5/16" push-through studs
WOODY'S WEARBAR SLIM JIM2 6" POL (S2P6-1300-1)
WOODY'SWOODY'S WEARBAR SLIM JIM2 6" POL (S2P6-1300-1)